3545 cadillac avenue ? costa mesa, ca 92626-1401 ? (714) 433-1200 ? fax (714) 433-1234 marketing bulletin date: march 28 th , 2008 to: all sales personnel from: isaac gonzalez re: product termination to all concerned parties, this bulletin is to notify all customers of the discontinuation of the following ecliptek series effective march 28 th , 2008: series description recommended replacement eps13h2 rohs compliant (pb-free) 3.3v 8-pin dip lvhcmos programmable spread spectrum oscillator eps13d2 in compliance with our end of life (eol) policy, this will serve as advanced notice of product termination. new orders wil l not be accepted after january 28 th , 2009, with delivery to conclude by march 28 th , 2009. if there are any questions pertain ing to this bulletin, please feel free to contact me. thank you again for your cooperation. best regards, isaac gonzalez configuration manager ecliptek corporation
manufacturer category series package voltage class rev . date ecliptek corp. oscillator eps13h2 8-pin dip 3.3v os3f 09/04 eps13h2 series oscillator eps13h2 electrical specifications 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. ? rohs compliant (pb-free) eps ? spread spectrum programmable clock oscillators 8-pin dip package low emi lvhcmos output 3.3v supply voltage stability to 100ppm center spread and down spread modulation tri-state and power down options available 14.318mhz to 166.000mhz -20c to 70c -55c to 125c 3.3v dc 0.3v dc -0.5v dc to 7.0v dc 30ma maximum 100ppm maximum v dd -0.4v dc minimum 0.4v dc maximum 2.7nseconds maximum 50 10(%) 50 5(%) 15pf hcmos load maximum tri-state or power down enables output enables output disables output: high impedance 350nsec maximum 3msec maximum 50a maximum 350nsec maximum 350nsec maximum 20ma maximum center spread down spread 30khz minimum, 31.5khz typical, 33khz maximum 700psec maximum < 25.000mhz 400psec maximum 25.000mhz to 133.000mhz 300psec maximum > 133.000mhz 5ppm maximum 10msec maximum nominal frequency operating temperature range storage temperature range supply voltage (v dd ) maximum supply voltage input current frequency tolerance / stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time duty cycle load drive capability output control function tri-state/power down input voltage power down output disable time power down output enable time standby current tri-state output disable time tri-state output enable time disable current spread spectrum percentage modulation frequency period jitter aging start up time unloaded; v dd = 3.3v dc inclusive of all conditions: frequency stability over the operating temperature range, supply voltage change, output load change, 1st year aging at 25c, shock, and vibration i oh = -8ma i ol = +8ma 20% to 80% of waveform at 50% of waveform internal pull down resistor of 100kohms typical on pin 5, internal pull up resistor of 100kohms typical on pin 1 v ih of 70% of v dd minimum no connection v il of 30% of v dd maximum unloaded; pin 1 = ground; v dd = 3.3v dc unloaded; pin 1 = ground; v dd = 3.3v dc 0.25%, 0.50%, 0.75%, 1.0%, 1.5%, 2.0% -0.50%, -1.0%, -1.5%, -2.0%, -3.0%, -4.0% cycle to cycle; spread spectrum-on; v dd = 3.3v dc first year at 25c h 5.6 l 13.2 w 13.2
manufacturer category series package voltage class rev . date ecliptek corp. oscillator eps13 8 pin dip 3.3v os3f 09/04 mechanical dimensions all dimensions in millimeters tape and reel dimensions all dimensions in millimeters environmental/mechanical specifications line 1: ecliptek line 2: eps13 ts output control function pd = power down ts = tri-state enable high series designator line 3: xx.xxx m frequency in mhz (5 digits maximum + decimal) line 4: xx y zz week of year last digit of year ecliptek manufacturing identifier note: pin 1 shall be designated with a dot marking specifications 250 pieces per reel compliant to eia-481a pin 1 locator for gull wing (1) for ?g? option (2)for ?g2? option pin 1: tri-state or power down pin 4: ground/case ground pin 5: output pin 8: supply voltage 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. characteristic specification fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-202, method 213, condition c vibration mil-std-883, method 2007, condition a lead integrity mil-std-883, method 2004 solderability mil-std-883, method 2002 temperature cycling mil-std-883, method 1010 resistance to soldering heat mil-std-883, method 210 resistance to solvents mil-std-883, method 215 part numbering guide eps13h2 c 1 h a - 44.736m - g tr packaging options blank=bulk (standard) tr=tape & reel (only offered with gull wing options g and g2) available options blank=none (standard) cb=cut leads to 2.540 0.500 (0.100? 0.020?) cc=cut leads to 3.175 0.500 (0.125? 0.020?) cd=cut leads to 3.810 0.500 (0.150? 0.020?) ce=cut leads to 4.445 0.500 (0.175? 0.020?) g=gull wing g2=gull wing (alternate) frequency frequency tolerance & stability/ operating temperature range c=100ppm maximum over -20c to +70c duty cycle 1=50% 10%, 2=50% 5% logic control h=tri-state j=power down spread spectrum percentage a = 0.25% center spread g = -0.50% down spread b = 0.50% center spread h = -1.00% down spread c = 0.75% center spread j = -1.50% down spread d = 1.00% center spread l = -2.00% down spread e = 1.50% center spread n = -3.00% down spread f = 2.00% center spread p = -4.00% down spread
|
